Start with the stem, not the shade
The "Cara" Adjustable Stemmed Wall Light is built around a simple idea: a handcrafted wooden shade on mechanical metal fittings. That means the aiming happens at the fittings, not by twisting or forcing the shade itself. Before you adjust anything, decide what the light needs to do—illuminate a page, light a hallway, or graze a wall—because that job determines the angle you set.
The catalog describes the "Cara" as a mix of ornamental beauty and practical functionality, with an elegant, industrial character. It does not include a step-by-step aiming procedure, so treat the guidance below as a practical framework rather than a manufacturer instruction. When in doubt, move the fitting gently and stop if you meet resistance.
What the "Cara" record confirms
- "Cara" Adjustable Stemmed Wall Light: The "Cara" is an adjustable wall light that combines handcrafted wooden shades with mechanical metal fittings. The adjustment comes from the metal fittings, so that is where you should make aiming changes—not by bending or rotating the wooden shade.

"Cara" Adjustable Stemmed Wall Light - "Cara" Adjustable Stemmed Wall Light: It is available in five metal finishes and three wood finishes: oak, walnut, or spalted beech shades paired with satin brass, raw brass, nickel, bronze, or Old English brass. Finish choice affects how the light reads in a room, but it does not change how the fitting adjusts. Choose the finish for your space, then aim the light for its task.
A practical sequence for aiming the "Cara"
- 1. Set the task first: Decide whether the light is for reading, ambient wall-washing, or general room light. For reading, you want the shade angled so light falls onto the page without shining into the reader's eyes. For ambient light, a more upward or outward angle can soften the effect.
- 2. Adjust at the metal fittings: The "Cara" uses mechanical metal fittings to create its adjustable stem. Make small movements at the fitting rather than applying force to the wooden shade. The catalog does not specify a locking mechanism or a maximum rotation, so move gently and check stability as you go.
- 3. Check from the sitting position: Stand or sit where you will actually use the light. Look for glare in your eyes and shadows on your task. A small change at the fitting can make a large difference at the page, so adjust in increments rather than sweeping the arm across its full range.
- 4. Confirm the shade is clear: Make sure the wooden shade is not resting against the wall or another surface after adjustment. The catalog does not give clearance measurements, so use your own judgment and keep the shade free of contact.
Reading versus ambient: two different aims
For reading, the goal is controlled light on the page and minimal glare. Aim the shade so the beam lands on your book or chair area, then sit back and check whether the light source itself is visible in your peripheral vision. If it is, a slight downward or sideways adjustment usually helps.
For ambient or wall-washing use, aim the shade more toward the wall or ceiling. The parabolic shape of the "Cara" shade will spread light differently depending on the angle, and the wood finish—oak, walnut, or spalted beech—will read differently under that light. The catalog does not provide beam angle or light output data, so treat the first setting as a starting point and refine it in the room.
Wood and metal pairings: what changes for aiming
The finish you choose does not change how the "Cara" adjusts, but it does change how the light looks once aimed. The catalog offers twelve combinations across three wood finishes and five metal finishes, though not every wood is paired with every metal.
- Oak shades: Available with satin brass, raw brass, nickel, bronze, or Old English brass. Oak is the most neutral wood option in the record, so it leaves the metal finish to set the tone.
- Walnut shades: Available with the same five metal finishes. Walnut is a darker wood, which can make the metal fitting stand out more when the light is aimed toward a wall.
- Spalted Beech shades: Listed with satin brass and raw brass only. If you want spalted beech, your metal choice is limited to those two in the supplied record.
What the supplied record does not settle
The catalog does not include installation instructions, a maximum rotation angle, a locking mechanism, or clearance measurements for the "Cara". It also does not confirm an IP rating or dimming compatibility. Those details matter for some rooms and setups, so if you need them, ask before ordering rather than assuming.
The record also does not specify a recommended height or distance from a chair or bed. Positioning advice for wall lights varies with ceiling height, furniture, and the user's sightline, so use the task-based approach above and adjust in the room. The "Cara" is made to order, which means the finish combination is chosen by you; it does not mean the fitting has a wider adjustment range than the standard design.


